6R60, 6R80, 6HP26 GPZ TORQKITS Installation Instructions | RCPTK-6R80

Components: A CLUTCH (1-2-3-4 FORWARD) TORQKIT - RTK-6R81, B CLUTCH (3-5-R DIRECT) TORQKIT - RTK-6R82, C CLUTCH (2-6 INTERMEDIATE) TORQKIT - RTK-6R83, D CLUTCH (LOW REVERSE) TORQKIT - RTK-6R84, E CLUTCH (4-5-6 OVERDRIVE) TORQKIT - RTK-6R85

‍

A CLUTCH (1-2-3-4 FORWARD) INSTALLATION | RTK-6R81

Components: 7 pcs GPZ Friction Plates, 6 pcs .069 Steel Plates, 1 pc .118 Steel Plate, 1 pc .084 Steel Plate

1. Install the factory waved plate.

2. Install 1 .118 Steel Plate.

3. Install 1 GPZ Friction Plate.

4. Install 1 .069 Steel Plate.

5. Install 1 GPZ Friction.

6. Continue alternating .069 Steel Plates and GPZ Friction Plates until all 6 .069 Steel Plates and all 7 GPZ Friction Plates are installed.

7. Install 1 .084 Steel plate.

8. Install the OE snap ring.

Clearance should be 0.030” – 0.050”

View Product Details >>

‍

B CLUTCH (3-5-R DIRECT) INSTALLATION | RTK-6R82

Components: 7 GPZ, 7 .069 Steel, 1 Snap Ring

1. Do not install the factory waved plate.

2. Install 1 Steel Plate.

3. Install 1 GPZ Friction Plate.

4. Continue alternating Steel Plates and GPZ Friction Plates until all 7 Steel Plates and all 7 GPZ Friction Plates are installed, ending with a GPZ friction plate.

7. Install the factory backing plate.

8. Install the supplied snap ring.

Clearance should be 0.019” – 0.051”

View Product Details >>

‍

C CLUTCH (2-6 INTERMEDIATE) INSTALLATION | RTK-6R83

Components: 8 GPZ, 7 .069 Steel, 1 .084 Steel, 1 Snap Ring

1. Install the factory waved plate.

2. Install 1 Thick Steel Plate.

3. Install 1 GPZ Friction Plate.4. Install 1 Thin Steel Plate

5. Install 1 GPZ Friction Plate.

6. Continue alternating Thin Steel Plates and GPZ Friction Plates until all 7 Thin SteelPlates and all 8 GPZ Friction Plates are installed.

7. Install the factory backing plate.

8. Install the supplied snap ring.

Clearance should be 0.027” – 0.043”

View Product Details >>

‍

D CLUTCH (LOW REVERSE) INSTALLATION | RTK-6R84

Components: 5 GPZ, 3 .069 Steel, 2 .084 Steel, 2 Selective .084 Steel

1. Install the factory backing plate.

2. Install 1 GPZ Friction Plate.

3. Install 1 Thin Steel Plate.

4. Install 1 GPZ Friction Plate.

5. Install 1 Thick Steel Plate.

6. Install 1 GPZ Friction Plate.

7. Install 1 Thick Steel Plate.

8. Install 1 GPZ Friction Plate.

9. Install 1 Thin Steel Plate.

10. Install 1 GPZ Friction Plate.

11. Install 1 Thin Steel Plate.

12. Install the factory waved plate.Clearance should be 0.039” – 0.062”

Note: 2 of the 4 thick steel plates are extra or selective. If necessary use one or both inplace of thin steels to achieve the proper clearance.

View Product Details >>

‍

E CLUTCH (4-5-6 OVERDRIVE) INSTALLATION | RTK-6R85

Components: 9 GPZ, 8 .069 Steel, 1 Thick Steel Apply Plate, 2 Selective Steels

1. Install 1 Thick Apply Plate.

2. Install 1 GPZ Friction.

3. Install 1 Thin Steel plate.

4. Continue alternating GPZ friction plates and steel plates until all 9 GPZ friction platesand all 8 thin steel plates are installed ending with a GPZ friction plate.

5. Install the factory backing plate and factory snap ring.

Clearance should be 0.019” – 0.035”

Note: Use the thicker steel plate(s) to adjust clearance as needed.

View Product Details >>

‍